Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!comp.vuw.ac.nz!cavebbs!lesley
From: lesley@cavebbs.gen.nz (Lesley Walker)
Newsgroups: comp.os.cpm
Subject: Re: uudecode for a K10...
Message-ID: <1991Feb13.180646.4032@cavebbs.gen.nz>
Date: 13 Feb 91 18:06:46 GMT
References: <1991Feb6.232504.5663@simasd.uucp> <1991Feb9.093717.13309@actrix.gen.nz>
Organization: The Cave MegaBBS, Public Access Usenet, Wellington, NZ
Lines: 18

In article <1991Feb9.093717.13309@actrix.gen.nz> ewen@actrix.gen.nz (Ewen McNeill) writes:
>In article <1991Feb6.232504.5663@simasd.uucp> donm@pnet07.cts.com (Don Maslin) writes:
>>
>> Actually, MEX114 will handle Xmodem and Xmodem batch in both CRC and Checksum
>> modes.  It will also handle 1k block transmission - Ymodem, but not Ymodem
>> batch.  You should be able to transfer binary files with no problem.
>> 
>Are you sure that Mex 1.14 (I haven't used it in ages), does Ymodem,
>rather than Xmodem-1K?  There is a big difference between the two; True

I'm quite sure it doesn't do Ymodem. I've tried it on several boards, and 
with Telix. It will talk to Xmodem, or in batch mode to Modem7, and it can 
sometimes be coaxed into using 1k blocks.
-- 
Lesley Walker, Wellington, NZ.
email: lesley@cavebbs.gen.nz
       Lesley.Walker@bbs.actrix.co.nz
Fido: 3:771/160 (GenBOARD)