Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!ucsd!ucbvax!JHUVM.BITNET!CASERTA From: CASERTA@JHUVM.BITNET (Rich Caserta) Newsgroups: comp.protocols.tcp-ip.ibmpc Subject: Re: NCSA Telnet on PS/2 Model 55sx & 3Com 3c523 card. Message-ID: <9102121250.aa28436@louie.udel.edu> Date: 12 Feb 91 17:41:41 GMT References: Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 28 On Mon, 11 Feb 91 02:13:33 GMT you said: >A friend of mine who works for a different organisation but is on the same >site is having problems getting NCSA telnet 2.2 to work on his IBM Model 55sx >PS/2. > >Could somebody mail/reply by news if they have NCSA telnet working with a 3c523 ... >We have tried using the packet driver (Ver 7) and have so far been unable to >get it to load. I would appreciate any help. Hello! If I'm not mistaken, I think there is a problem with Ver 7 of the 3C523 PD. There should be a repaired one (separately archived) at sun.soe.clarkson.edu. Otherwise, try an older one. I've FTP'd between two PS/2 55SXs using NCSA Telnet 2.2TN (Clarkson enhanced) using the built-in driver and 3C523 default settings. No problems. I think yours is not working because of the bad packet driver. One other thing--if you use the built-in driver, specify the RAM address in CONFIG.TEL as, e.g. C800 even though you might really want to say C8000. I think this is a problem I figured out by chance a while ago. If you need more info, let me know. Good luck! Rich Caserta caserta@jhuvm.hcf.jhu.edu