Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!comp.vuw.ac.nz!actrix!kennels!sbeagle From: sbeagle@kennels.actrix.gen.nz (Sleeping Beagle) Newsgroups: comp.sys.amiga.datacomm Subject: Re: 19200 baud amiga Message-ID: Date: 13 Feb 91 02:39:58 GMT References: <2587@tmiuv0.uucp> Organization: Orb Systems Unlimited, NZ Lines: 24 rick@tmiuv0.uucp writes: > In article , cshort@nmsu.edu (Spmg*d, Lor > > i've got my amiga 1000 at work wired (pins 2,3,7) to a sparc station. > > the setup works great at 9600 baud, but i would really like to run > > things at 19,200 (i'm greedy, eh). here's the problem: > > > > when i cat a large file i get overflow errors & > > when i try to d/u load i get bad CRC's. i'm using Atalk III and > > unix based send zmodem (sz 3.07) I'm quite happily using 19200 bps between my AT and Amiga 500. The Amiga is running JR-Comm 0.94a... Transfer rates vary between 1700 cps and slightly over 1900 cps. This is with half duplex enabled (if that does anything in this mode!) and XON/XOFF handshaking enabled. -- ** Official Signature for Sleeping Beagle (aka Thomas Farmer)! ** sbeagle@kennels.actrix.gen.nz || Disclaimers are for sick societies ** Thomas.Farmer@bbs.actrix.gen.nz || with too many lawyers.