Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!rex!uflorida!gatech!purdue!haven!mimsy!oasys!dtoa1!lkelly
From: lkelly@dtoa1.dt.navy.mil (Kelly)
Newsgroups: comp.sys.amiga.hardware
Subject: Need help with IBM/Amiga hard drive interfacing
Message-ID: <5836@oasys.dt.navy.mil>
Date: 11 Feb 91 22:27:34 GMT
Sender: news@oasys.dt.navy.mil
Reply-To: lkelly@dtoa1.dt.navy.mil (Lawrence Kelly)
Organization: David Taylor Research Center, Bethesda, MD
Lines: 15

Okay, got a question for any hardware-hackers.  I've recently been
able to obtain (at an extreme discount $20) an OLD Syquest removable
drive (I think it is 5 meg / cart.), and would like to just play around
with it (I know, access time and storage suck, but just for fun).  I
found out that the drive was used with an IBM, and apparently requires
the ST-506 interface.  Wanted to know if there had been any hardware-hacks
available for an A-500 to ST-506, or even some commercial solutions.

			Thanx for the help,

			Larry Kelly (lkelly@dtoa1.dt.navy.mil)
----------------------------------------------------------------------------
[   /\\                                           Larry Kelly              ]
[  /--\\                                   osrad: KELOSR1                  ]
[ /    \\// miga...The ONLY Computer  - Internet: lkelly@dtoa1.dt.navy.mil ]