Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!udel!brahms.udel.edu!don
From: don@brahms.udel.edu (Donald R Lloyd)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: SRAM and BURST mode on 3000
Message-ID: <18701@brahms.udel.edu>
Date: 13 Feb 91 03:29:35 GMT
References: <18764@cbmvax.commodore.com> <1991Feb11.015011.621@medsys.uucp> <18888@cbmvax.commodore.com>
Organization: University of Delaware
Lines: 12


     When I first run SetRamsey, it indicates that static, burst, and wrap are
all off, despite the fact that I've got 2M of 256x4 SCRAMS inside (the DIPs've
been moved over to the chip RAM area).  Other postings here have indicated that
It should be indicating that static mode is on.  Any idea what my problem might
be?  Setramsey does seem to turn static mode on without complaining, so I
assume (read hope, pray) that the chips themselves aren't the problem.

-- 
  Gibberish             Publications Editor, AmigaNetwork 
  is spoken             Contact don@brahms.udel.edu for more information.
    here.               DISCLAIMER:  It's all YOUR fault.