Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!caen!cumin.engin.umich.edu!baronz
From: baronz@caen.engin.umich.edu (Aaron L Richards)
Newsgroups: comp.sys.amiga.multimedia
Subject: Re: I know I am griping, but I am under a deadline!!!
Summary: AmigaVision 1.53G - Same problems
	 Mouse Interrupt can NOT be active on Data Form
Message-ID: <1991Feb15.214135.16126@engin.umich.edu>
Date: 15 Feb 91 21:41:35 GMT
References: <1384@lehi3b15.csee.Lehigh.EDU> <1991Feb11.173158.12656@cs.dal.ca> <634.27b9099a@vger.nsu.edu>
Sender: news@engin.umich.edu (CAEN Netnews)
Organization: The University of Michigan, Ann Arbor
Lines: 64

In article <634.27b9099a@vger.nsu.edu>, manes@vger.nsu.edu ((Mark D. Manes), Norfolk State University) writes:
> In article <1991Feb12.054846.22987@engin.umich.edu>, baronz@caen.engin.umich.edu (Aaron L Richards) writes:
> > 	Not to many postings ago, I reported that mouse interrupts seemed
> > to be functionally disabled, even if not graphically so (The hit boxes
> > defined still show on the screen, even if theyy do not function)
***
I meant that the mouse interrupts are functionally disabled by the Data
Form icon.  If you place a Mouse Interrupt hit box on the same form that
you are using a data form on, while the data form is active, the Mouse
Interrupt hit box will Not be active.  P.S.  I have visited my
dealer and gotten the 1.53 update.

> I have used AV and interupt icons do work.  You noted at the bottom
> of your posting that you are using 1.31 of AmigaVision.  I shudder as
> 1.31 has some terrible problems, one of them being corruption of your
> flow file if you move icons too much.  Your Amiga dealer has been
> given a update to 1.53g and I _strongly_ urge you to get this update.
> 
> > 
> > 	I have found another error not documented in the AV manual,
> > that occurred while I was testing the mouse interrupts in Amiga Vision.
> > If you have the synthesized voice reading a file (I was in this case having it read
> > s:startup-sequence) and have the mouse interrupt occur and show a 
> > graphic image, Amiga Vision will pop up a screen that says something to 
> > the effect of ERROR!!!  Voice Active!.
> 
> The error Voice Active means that you attempted to use sound while a 
> sound was in progress.  You should when processing a interupt, stop
> the current sound and then use your new sound.
***
My interrupt did NOT start any new sounds, so I know that that is not the
problem.

> > I looked up the ERROR!!! Voice Active! error in the manual.  Or tried
> > to anyway.  There is a beautiful list of errors in Appendix A,
> > but it doesn't say anythig about the Voice active error.
> 
> The AmigaVision manual is not bad, but it is sometimes difficult to
> find things.

I haven't had any problem finding the information that I needed in the
manual, its just that in this case it didn't exist!

> Get your upgrade... your code is at stake! ;-)

Did, and it hasn't made a difference..> 
> > 
>  -mark=
>      
>  +--------+   ==================================================          
>  | \/     |   Mark D. Manes                    "Mr. AmigaVision" 
>  | /\  \/ |   manes@vger.nsu.edu                                        
>  |     /  |   (804) 683-2532    "Make up your own mind! - AMIGA"
>  +--------+   ==================================================
>                      


--
*	President MACRO on Campus			  	    * 
*       (Michigan's Amiga Computer Resource Organization)           * 
*	Senior Computer Consultant -> Organizational Studies Lab    *
*	Amiga Student Representative on Campus		 	    * 
*	baronz@caen.engin.umich.edu 			   	    *
* 	Aaron_l._Richards.ubmts.cc.umich.edu		   	    *