Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!spool.mu.edu!uunet!cs.dal.ca!ug.cs.dal.ca!dewolfe
From: dewolfe@ug.cs.dal.ca (Colin DeWolfe)
Newsgroups: comp.sys.amiga.programmer
Subject: Re: 2.0 Window Show parameter
Message-ID: <1991Feb12.213507.22687@cs.dal.ca>
Date: 12 Feb 91 21:35:07 GMT
References: <1991Feb11.173000.8671@visix.com>
Sender: news@cs.dal.ca (USENET News)
Organization: Math, Stats & CS, Dalhousie University, Halifax, NS, Canada
Lines: 24
Nntp-Posting-Host: ug.cs.dal.ca

In article <1991Feb11.173000.8671@visix.com> brett@visix.com (Brett Bourbin) writes:
>After looking through all the docs that I have from my A3000, I wondered
>if there as a way, (ie. preference) to set the 2.0 Workbench to show all
>files as icons in Workbench mode?  I can select a disk and use the pull-
>downs (really pop-ups on my machine) and set this, but I must do this every
>time I boot the machine.
>
>I thought that this should be in one of the pref windows, but I could not
>find it.


I also tried to figure out this one, and it all boils down to using snap
shot from the windows menu  (SNAPSHOT - WINDOW).  From now on, the
disk will remember to display all files.
>
>-- 
>                                __
>  Brett Bourbin          \  / /(_  /\/   11440 Commerce Park Drive
>    ..!uunet!visix!brett  \/ / __)/ /\   Reston, Virginia 22091
>    brett@visix.com       Software Inc   (703) 758-2733

--
Colin DeWolfe
dewolfe@ug.cs.dal.ca