Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!samsung!noose.ecn.purdue.edu!en.ecn.purdue.edu!platkus
From: platkus@en.ecn.purdue.edu (Shawn W Platkus)
Newsgroups: comp.sys.apple2
Subject: Re: sonic blaster static
Message-ID: <1991Feb11.212225.26811@en.ecn.purdue.edu>
Date: 11 Feb 91 21:22:25 GMT
References: <NAGENDRA.91Feb10205942@bucsf.bu.edu>
Distribution: comp
Organization: Purdue University Engineering Computer Network
Lines: 16

In article <NAGENDRA.91Feb10205942@bucsf.bu.edu> nagendra@bucsf.bu.edu (nagendra mishr) writes:
>I'm gettin a whole lot of static while digitizing sound. Is this common
>with the sonic Blaster? I tried moving the card around to different slots
>and placing strips of paper to stop intereference between different cards.
>I'm thoroughly confused. Is static common place durring recording?
>I'm pretty sure it's not my microphone because when I unplug it, i still
>see tons of static in the ossiliscope screen.


I don't have a sonic blaster, but when I digitize with a microphone on a 
FutureSound board, there is almost no static if you turn off the monitor
while digitizing.  
	This should help a Sonic Blaster too!


Platkus