Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!convex!quigley From: quigley@convex.com (Jeff Quigley) Newsgroups: comp.sys.apple2 Subject: Re: Proterm and MNP5 Message-ID: Date: 11 Feb 91 21:19:40 GMT References: <91041.204200JRE103@psuvm.psu.edu> Sender: usenet@convex.com (news access account) Organization: Convex Computer Corporation, Richardson, Tx. Lines: 16 Nntp-Posting-Host: neptune.convex.com > Okay, here I go again. I recently purchased a viva 2400 baud modem with MNP5 >, and I was wondering the correct way to configure Proterm with it. I set the >modem port on my GS to 9600 to handle the bursts of speed, but I have trouble >setting the hardware configuration. It seems that proterm likes to connect at >a single spped and stay there, not allowing the modem to change the speed. If >anyone has some insight on this, please follow-up or E-mail me. I think it >would be of interest to many here. I have recently tried to do the same thing with my old friend "AsciiExpress: The Professional" on my //c. Is this possible, or does the software have to be capable of auto-magic baud rate selection on the fly? Jeff Quigley Convex Computer Corporation quigley@convex.com 3000 Waterview Parkway Richardson, TX 75080 (214) 497-4439