Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zephyr.ens.tek.com!orca.wv.tek.com!pogo!rickc From: rickc@pogo.WV.TEK.COM (Rick Clements) Newsgroups: comp.sys.cbm Subject: Re: CP/M boot diskette Keywords: CP/M Message-ID: <10439@pogo.WV.TEK.COM> Date: 12 Feb 91 20:28:15 GMT References: <1991Feb2.011219.9038@ugle.unit.no> Reply-To: rickc@pogo.WV.TEK.COM (Rick Clements) Organization: Tektronix, Inc., Wilsonville, OR. Lines: 28 In article menace@fquest.fidonet.org (Dennis Little) writes: >pstene@Lise.Unit.NO (Petter Stene) writes: >> I was wondering if anybody had a boot diskette for CP/M which I >> could get a copy of... I have the module, but I managed to over- >If you get any replies to this one, let me know as I have about the same >problem (bought the used cart for $5 but no software for it that works.) There is a version of CP/M for the C64 and a version for the C128. The C128 doesn't need the cartrage. I looked into CP/M when I had a C64, but someone on the net had said it was flakey. The C128 with a built in Z80 works great. Commodore offers a set of utilities for CP/M. (Some will run only on the C128 because they require CP/M 3.0) It seams like they should stock the opperating system also. I saved the following address from the net. It should get you close to some- one who can help you. Greg Givler Q-Link: Commodore Telecommunications Coordinator CompuServe: CBM/Support 76703,2047 Commodore Customer Support INTERNET: givler@cbmvax.uucp 215-436-4200 (Support Line) OR :::::: givler@cbmvax.cbm.commodore.com -- Rick Clements (RickC@pogo.WV.TEK.COM)