Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!rpi!dali.cs.montana.edu!milton!sumax!amc-gw!morpho!namsi
From: namsi@morpho.UUCP (namsi/50000)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: IDE Hard Disk Drive
Message-ID: <469@morpho.UUCP>
Date: 12 Feb 91 21:24:04 GMT
Reply-To: namsi@morpho.UUCP (namsi/50000)
Distribution: usa
Organization: North American Morpho Systems Inc, Tacoma WA
Lines: 18

I am piecing together a 386-SX system and decided to use an
IDE drive/controller.  I called HD International for price
information on a WD93044A (42MB, 28ms) and WD controller.  The
salesman told me they had numerous problems with the drive and
recommended going with the Connor CP3000 and a DTC DT3767
controller. 

Please share your experiences (good/bad) with IDE HDs and
controllers.

Mail responses to me and I will summarize to the Net.

----

				    North American MORPHO Systemes Inc.
     ____ __ __ __    __       
    / / // //_//_//_// /                    amc-gw!morpho!eric
   / / //_// \/  / //_/