Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!comp.vuw.ac.nz!actrix!foster!derek From: derek@foster.actrix.gen.nz (Derek Foster) Newsgroups: comp.sys.ibm.pc.hardware Subject: Motherboard Pro 286/386 Message-ID: Date: 15 Feb 91 00:13:10 GMT Organization: BLUES INC0RP0RATED Lines: 27 Hi people.. First up, I'll admit that my knowledge of hardware is practically zero, and will gladly receive any pointers on this one.. I have a 386 motherboard which was bought about 18 mths-2 years ago, second-hand as part of a "mongrel" system.. unfortunately, no manuals to go with it. Person I bought it from knows about as much as me, so no help there.. The motherboard is marked "Pro 286/386 ST" "(C)1986 Progressive Electronics Rev-B".. the 386 chip sits on a 32-bit card, & only markings are "80386 Micro". Mem chips sit on a 16-bit card, markings are "RAM 4464". BIOS is marked "Pro 286/386" ver 3.11. I guess what I'm hoping is that someone out there in netland may have one of these boards, and either be able to help me with documentation re jumpers, configuration, etc, (I'll gladly pay postage!) or alternatively point me in the direction of a supplier (or manufacturer) I could perhaps contact.. I usually follow this group, so either a post or mail would be good. Any assistance would be greatly appreciated.. thanks in advance. -- derek@foster.actrix.gen.nz : ``After listening carefully to the material BlueS InC. PO BoX 12-420 : you submitted, I'm afraid it's not what WellingtoN NeW ZealanD : we're looking for at this time...''