Xref: utzoo comp.protocols.tcp-ip.ibmpc:4883 comp.sys.ibm.ps2.hardware:402
Path: utzoo!utgpu!watserv1!watmath!att!pacbell.com!ucsd!swrinde!zaphod.mps.ohio-state.edu!wuarchive!uunet!munnari.oz.au!metro!atom2!ian
From: ian@atom2.LHRL.OZ.AU (Ian Crakanthorp)
Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.ps2.hardware
Subject: NCSA Telnet on PS/2 Model 55sx & 3Com 3c523 card.
Message-ID: <50@atom2.LHRL.OZ.AU>
Date: 11 Feb 91 02:13:33 GMT
Organization: Australian Nuclear Science & Technology Organisation
Lines: 16

A friend of mine who works for a different organisation but is on the same
site is having problems getting NCSA telnet 2.2 to work on his IBM Model 55sx
PS/2.

Could somebody mail/reply by news if they have NCSA telnet working with a 3c523
MICROCHANNEL card.  By this could I have the config.tel, the config.sys/
autoexec.bat, The hardware setup of the 3c523 card (addresses interupts etc),
the packet driver used (or not used), please.

We have tried using the packet driver (Ver 7) and have so far been unable to
get it to load.  I would appreciate any help.

Thanks

Ian Crakanthorp			ian@atom.lhrl.oz.au
				ian%atom.oz@munnari.cs.mu.oz.au