Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!ux1.cso.uiuc.edu!resnick
From: resnick@cogsci.uiuc.edu (Pete Resnick)
Newsgroups: comp.sys.mac.comm
Subject: Re: NCSA Telnet 2.3 + Asante McCon+SE card bombs?
Message-ID: <1991Feb14.025315.17853@ux1.cso.uiuc.edu>
Date: 14 Feb 91 02:53:15 GMT
References: <12451@pucc.Princeton.EDU>
Sender: news@ux1.cso.uiuc.edu (News)
Organization: University of Illinois at Urbana
Lines: 18

IRWIN@pucc.Princeton.EDU (Irwin Tillman) writes:

>I am having trouble running NCSA Telnet 2.3 on a Mac SE that has just
>had an Asante MacCon+SE Ethernet adapter installed.  Whenever
>I launch the application, it bombs, id=12.

First, I am assuming you are not using MacTCP, and are instead using
the regular NCSA Telnet with its own TCP. My guess is that config.tel
does not have the proper harware setting. For a Mac SE it should be
hardware=EtherSE. Try that.

pr
--
Pete Resnick             (...so what is a mojo, and why would one be rising?)
Graduate assistant - Philosophy Department, Gregory Hall, UIUC
System manager - Cognitive Science Group, Beckman Institute, UIUC
Internet/ARPAnet/EDUnet  : resnick@cogsci.uiuc.edu
BITNET (if no other way) : FREE0285@UIUCVMD