Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!news.funet.fi!cc.tut.fi!cc.tut.fi!n67786 From: n67786@lehtori.tut.fi (Nieminen Tero) Newsgroups: comp.sys.mac.hardware Subject: Re: Mix & Match SIMM speeds in SE/30 ? Message-ID: Date: 10 Feb 91 16:18:00 GMT References: <11975.27b326a0@amherst.bitnet> Sender: n67786@cc.tut.fi (Nieminen Tero) Organization: Tampere Univ. of Technology, Finland. Lines: 11 In-Reply-To: ksbolduan@amherst.bitnet's message of 8 Feb 91 22:30:56 GMT In article <11975.27b326a0@amherst.bitnet> ksbolduan@amherst.bitnet writes: I currently have 5 megs of RAM in my SE/30 (4x1meg + 4x256k). The 4 1 meg SIMMs are, I think, the 80ns type. If I were to upgrade to 8 megs, would it be necessary to get SIMMs of the same speed? Or, is it ok to mix and match SIMM speeds inside my SE/30? The simms need only be fast enough for your machine. No matching is needed. -- Tero Nieminen Tampere University of Technology n67786@cc.tut.fi Tampere, Finland, Europe