Newsgroups: comp.sys.mac.hardware
Path: utzoo!utgpu!cunews!bnrgate!bwdls61!bnr.ca!bschmidt
From: bschmidt@bnr.ca (Ben Schmidt (BNR))
Subject: Modifying MacII, IIfx soft power switch so Mac powersup after power failure
Message-ID: <1991Feb14.230426.8814@bwdls61.bnr.ca>
Sender: usenet@bwdls61.bnr.ca (Use Net)
Organization: Bell-Northern Research
Date: Thu, 14 Feb 91 23:04:26 GMT

Apologies if this is a FAQ, but is there a modification that one can 
perform so that when the power fails on a Mac II or IIfx, it will 
automatically boot up when the power comes back?  Standard application is 
when the power failure occurs on a Mac II running AppleShare.

Soldering iron solutions acceptable, as are 3rd-party add-ons (PowerKey?). 
 many thx,

Ben Schmidt     Bell-Northern Research, Ltd.   Ph: (613) 763-3906
Information     P.O. Box 3511, Station C       FAX:(613) 763-3283
Technology      Ottawa Canada K1Y 4H7          bschmidt@bnr.ca