Path: utzoo!mnetor!tmsoft!torsqnt!lethe!yunexus!ists!helios.physics.utoronto.ca!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!unido!horga!veeble!cube!martin From: martin@cube.han.de (Martin Ortlepp) Newsgroups: comp.sys.next Subject: trouble with serial ports Message-ID: Date: 6 Feb 91 11:35:09 GMT Lines: 28 -- Hi, after upgraded my cube to 68040 and 2.0 I have problems with the serial ports. The old board worked fine but the new one doesn't. According to the documentation I changed my serial cable to support hardware flow control. Then I edited the /etc/remote entries to /dev/cufa. But really nothing happened. I tried tip a19200 (this entry exists in /etc/remote) to check the configuration. Neither my modem nor the modem of a friend I connected to the cube worked. The cabling is correct. Maybe the upgrade board is damaged. But before I send it back I would like to ask if there is anyone who has an idea. Thanx, -- martin ====================================================================== Martin Ortlepp EMAIL: Goettinger Chaussee 162 A domain: martin@cube.han.de 3000 Hannover 91 uucp: martin@cube.UUCP Germany Phone: (49) 511 421278 FidoNet: 2:240/504 Fax: (49) 511 671299 ======================================================================