Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!elroy.jpl.nasa.gov!jarthur!petunia!csuchico.edu!news
From: tempest@ecst.csuchico.edu (Kenneth K.F. Lui)
Newsgroups: comp.sys.next
Subject: Re: tape cartridges, was: floppy drives / old cubes
Message-ID: <1991Feb10.230458.16876@ecst.csuchico.edu>
Date: 10 Feb 91 23:04:58 GMT
References: <weigele.665861472@bosun1> <130157@gore.com>
Sender: news@ecst.csuchico.edu (USENET)
Reply-To: tempest@ecst.csuchico.edu (Kenneth K.F. Lui)
Organization: California State University, Chico
Lines: 13

In article <130157@gore.com> jacob@gore.com (Jacob Gore) writes:
>Well, one thing to discourage replacement of the drive chassis is the fact
>that it's also the case of the power supply.

The drive chassis bolts onto the power supply case.  They (the
chassis and power supply) are separate and are connected via the
same type of hex screws used to connect ODs and the rear panel.


Ken
______________________________________________________________________________
tempest@ecst.csuchico.edu, tempest@walleye.ecst.csuchico.edu,|Kenneth K.F. Lui|
tempest@sutro.sfsu.edu, tempest@wet.UUCP                     |________________|