Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!uunet!wang!ice From: ice@wang.com (Fredrik Nyman) Newsgroups: comp.sys.next Subject: Re: Fujitsu installation problems... Message-ID: Date: 15 Feb 91 15:11:29 GMT References: <26929@uflorida.cis.ufl.EDU> Organization: Wang Labs, Lowell MA, USA Lines: 19 mfi@serc.cis.ufl.edu (Mark Interrante) writes: > The drive sits on top of the OD with the power cable on the right. > When I plug the 25 pin flat cable (that comes out of the cpu > to the OD then to the HD) in and boot the cube says loading from OD > then immediatley tries to load off the network (which doent exist). > If I unplug the Fujitsu everything works. I am pluging the cable > into the right most part of the 50 pins. Note that flipping the > cable makes no difference. Has anyone had such a problem on their disk? It sounds like your OD has a SCSI bus termination. Remove it and make sure your Fujitsu has SCSI termination. -- Disclaimer: Wang doesn't care about my opinions, so why should you? Internet: BITNET: (in order of preference) USnail: Wang Labs, Inc., M/S 019-490, One Industrial Ave., Lowell, MA 01851