Path: utzoo!attcan!uunet!mcsun!ukc!mucs!logitek!martino From: martino@logitek.co.uk (Martin O'Nions) Newsgroups: comp.sys.novell Subject: Re: Mix XNS with Novell... Message-ID: Date: 28 Jan 91 10:43:41 GMT References: <1991Jan17.202331.1@maven.u.washington.edu> <11683@ur-cc.UUCP> Organization: Logitek Plc. Lines: 24 sph@logitek.co.uk (Stephen Hope) writes: >Our support people (who have to handle both types of LAN software) use this >with 3Com Ethernet cards internally. Just as a matter of interest, the same >systems also support TCP/IP, using 3Coms PCS/TCP. O.K. For the benefit of those of you who spotted our deliberate mistake, we do of course use 3+ Open TCP, which works with DPA and the NDIS drivers, rather than PCS/TCP which was designed for use with the older MINDS drivers. It does work however, honest! (this posting was produced from a telnet session using 3+ Open TCP over 3+ Open connectivity for NetWare (IPX stack) over XNS). Martin -- DISCLAIMER: All My Own Work (Unless stated otherwise) -------------------------------------------------------------------------- Martin O'Nions Logitek Group Support martino@logitek.co.uk -------------------------------------------------------------------------- Down the drinking well / Which the plumber built her Aunt Mathilda fell / - We should buy a filter.... (Harry Graham - Ruthless Rhymes for Heartless Homes)