Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!daver!bungi.com!news
From: eyal@echo.canberra.edu.au (Eyal Lebedinsky)
Newsgroups: comp.sys.nsc.32k
Subject: re: problems at power up
Message-ID: <9102112206.AA08821@delta.canberra.edu.au>
Date: 12 Feb 91 13:06:41 GMT
Sender: news@daver.bungi.com
Lines: 10
Approved: news@daver.bungi.com

Hello Everyone,

I seem to remember having similar experience. This was in the first hours of
the board's life, before the chips where fully seated. One I convinced myself
that a 3mm space was too much between the chip and the board and gathered the
courrage to run a steam roller over it the simptoms disappered.

-- 
Regards
	Eyal