Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!ucsd!nosc!crash!pnet01!jca
From: jca@pnet01.cts.com (John C. Archambeau)
Newsgroups: comp.unix.sysv386
Subject: Re: AST 4 port card (WAS: FAS 2.08 problems...)
Message-ID: <7518@crash.cts.com>
Date: 11 Feb 91 16:56:06 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 25

rbt@tous.uucp (Robert B. Tate) writes:
>
> [ Stuff about my posted problem deleted ]
>
>I have 2, (old?) used, AST 4 port cards. (P/N 202013.)
>
>Board One is marked CC-832/AT (S/N 8558) with 1 8 position DIP SW
>Board two is marked CC-322 (S/N 21413), with 3 DIP SW's, (ASSY. REV. B)

My card is an old AST FourPort/DOS card.  The number stamped in the middle of
the card is CC-832.  The P/N is 202013.  I've had no problems using this card
under SCO Xenix 386 2.3.3 or ISC 2.0.2 other than the problem with using
IRQ 2 (9) with FAS 2.08.  I have the full documentation and manuals for my AST
board.  I'll e-mail you the pinout of the cable when time permits.

     // JCA

 /*
 **--------------------------------------------------------------------------*
 ** Flames  : /dev/null                     | What to buy?
 ** ARPANET : crash!pnet01!jca@nosc.mil     | EISA or MCA?
 ** INTERNET: jca@pnet01.cts.com            | When will the bus wars end?
 ** UUCP    : {nosc ucsd hplabs!hp-sdd}!crash!pnet01!jca
 **--------------------------------------------------------------------------*
 */