Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!usc!ucselx!crash!pnet01!jca From: jca@pnet01.cts.com (John C. Archambeau) Newsgroups: comp.unix.sysv386 Subject: Re: FAS 2.08 problems... Message-ID: <7508@crash.cts.com> Date: 10 Feb 91 23:16:02 GMT Sender: root@crash.cts.com Organization: People-Net [pnet01], El Cajon CA Lines: 37 gil@limbic.ssdl.com (Gil Kloepfer Jr.) writes: >In article <7457@crash.cts.com> jca@pnet01.cts.com (John C. Archambeau) writes: >>I'm having a problem with FAS 2.08. The problem I am having is >>getting it to work with both my standard COM1 and COM2 ports and my >>AST FourPort card. I can use either one card or the other, but if I >>have both of them in my system, there's a problem. >> >>If I use my original AT I/O card, I get an unkillable process when I >>try to do a cu to COM1. I can not do a ~. to get out of cu. Everything >>works ok with my AST card both with cu and under VP/ix. > >It took me a little longer this time, but I did get FAS 2.08 running, >and it seems to be working fine with the standard com1/com2 and Steve >Nuchia's 4-port card. > >When I finally got everything configured, I found a nasty problem with >my cabling -- I had the hardware flow control lines (RTS/CTS) straight- >through instead of swapped (between 2 machines). You might want to >check that out. I managed to fix the problem with it. If I move the AST FourPort off of IRQ 2 (9), it works just fine either in or out of VP/ix. I do not have any devices that are using IRQ 2 (9) in my system. Question I have is what could possibly be causing my problems with using IRQ 2 (9) with my AST FourPort card? // JCA /* **--------------------------------------------------------------------------* ** Flames : /dev/null | What to buy? ** ARPANET : crash!pnet01!jca@nosc.mil | EISA or MCA? ** INTERNET: jca@pnet01.cts.com | When will the bus wars end? ** UUCP : {nosc ucsd hplabs!hp-sdd}!crash!pnet01!jca **--------------------------------------------------------------------------* */