Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!sdd.hp.com!hplabs!hpcc05!hparc0!paulg
From: paulg@hparc0.HP.COM (Paul Gillingwater)
Newsgroups: comp.unix.sysv386
Subject: Re: Adding second HD under ISC 2.0.2
Message-ID: <3440010@hparc0.HP.COM>
Date: 14 Feb 91 21:26:16 GMT
References: <1991Feb12.065726.5497@foster.avid.oz.au>
Organization: HP Australasian Response Centre (Melbourne)
Lines: 14

>/ hparc0:comp.unix.sysv386 / chris@endgame.gsfc.nasa.gov (Chris Shenton) /  7:19 am  Feb 13, 1991 /
>>In article <1991Feb12.150008.3737@ux1.cso.uiuc.edu> brando@uicsl.csl.uiuc.edu (Brandon Brown) writes:

   >>Well, speaking from experience, if you try to use a primary "AT" style 
   >>controller with an Adaptec secondary controller with ISC 2.0.2, it won't
   >>work. I had the exact same problem before I upgraded to ISCv 2.2.

>Arrrrg. I've got ISC 2.0.2 with a WD AT style controller, and I've been
>thinking of getting a SCSI controller and big Conner disk. You're saying
>this won't work?

I have ISC 2.02, and have successfully installed an ESDI controller
as the primary (boot) controller, and the Adaptec 1542A SCSI controller
as secondary, with two drives and tape.