Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!dali.cs.montana.edu!milton!uw-beaver!zephyr.ens.tek.com!tekgen!raven.uss.tek.com!mike
From: mike@raven.uss.tek.com (Mike Ewan)
Newsgroups: comp.unix.ultrix
Subject: Re: Help with routed and bind
Message-ID: <7313@tekgen.BV.TEK.COM>
Date: 13 Feb 91 03:45:52 GMT
References: <1991Feb12.131943.1@lub001.lamar.edu>
Sender: news@tekgen.BV.TEK.COM
Reply-To: mike@raven.uss.tek.com (Mike Ewan)
Organization: Tektronix, Inc.  Beaverton OR
Lines: 21

In article <1991Feb12.131943.1@lub001.lamar.edu> booth@lub001.lamar.edu writes:
>I am trying to setup our new Ultrix DECstation 5100 on our TCP/IP network.
>I have got all the local stuff working, however, I get "Network Unavailable"
>when trying to get off my net to internet. We are using a Cisco router. I have 
>/etc/routed running. I can define /etc/route to specific Internet net names 
>and they work.

Add the following to /etc/rc.local right after routed:

/etc/route -f add default cisco-ip-address 1

and everything should work correctly.  Also comment out the routed
entry in /etc/rc.local.

Mike

--
 Michael Ewan    (503)627-6468      Internet:  mike@raven.USS.TEK.COM
 Unix Systems Support                   UUCP:  ...!uunet!raven.uss.tek.com!mike
 Tektronix, Inc.                  Compuserve:  73747,2304
"Fig Newton: The force required to accelerate a fig 39.37 inches/sec."--J. Hart