Xref: utzoo trial.rec.metalworking:59 misc.misc:11237
Path: utzoo!utgpu!cunews!bnrgate!bwdls61!bwdls58!bwdlh490!hwt
From: hwt@bwdlh490.BNR.CA (Henry Troup)
Newsgroups: trial.rec.metalworking,misc.misc
Subject: Re: Toolbit Grinding Jigs?
Message-ID: <5584@bwdls58.UUCP>
Date: 12 Feb 91 23:46:15 GMT
References: <5576@bwdls58.UUCP> <5580@bwdls58.UUCP>
Sender: news@bwdls58.UUCP
Reply-To: hwt@bwdlh490.BNR.CA (Henry Troup)
Distribution: na
Organization: Bell-Northern Research Ltd.
Lines: 27

Oops, clock was messed up.

|>In article <5576@bwdls58.UUCP>, danko@bwdls58.UUCP (Attila Danko) writes:
|>|>
|>|>Does anyone know of a source of jigs for grinding lathe-tool bits to
|>|>correct shapes --- or do machinists merely develop great 
|>|>dexterity and skill and do it by hand?
|>|>
|>|>   
|>|>-- 
|>|>Attilla Danko                BNR, P.O. Box 3511, STN C, Ottawa, ONT,
|>K1Y  613-763-7951
|>|>UUCP:     ..!uunet!bnrgate!bcarh407!danko            
|>|>BITnet:   danko@BNR.CA
|>|>standard_disclaimer -> runningprocptr@.disclaimer;
|>
|>I suspect that trial.* doesn't work well, so I'm cross posting the enquiry
|>to misc.misc.  If I wanted trouble, I'd crosspost to alt.tiny-toon :-)
|>           
|>
|>Henry Troup - BNR owns but does not share my opinions | The .signature is the
|>P.O. Box 3511, Stn. C. Ottawa, Ontario, Canada K1Y 4H7| lowest form of humour
|>uunet!bnrgate!hwt%bwdlh490 HWT@BNR.CA +1 613-765-2337 | 
                     
Henry Troup - BNR owns but does not share my opinions | The .signature is the
P.O. Box 3511, Stn. C. Ottawa, Ontario, Canada K1Y 4H7| lowest form of humour
uunet!bnrgate!hwt%bwdlh490 HWT@BNR.CA +1 613-765-2337 |