Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!rex!ukma!usenet.ins.cwru.edu!ncoast!nshore!dwerger!jeff
From: jeff@dwerger.UUCP (Jeffrey E. Finucane)
Newsgroups: comp.dcom.lans
Subject: Re: trouble with WD8003e board
Message-ID: <391@dwerger.UUCP>
Date: 20 Feb 91 16:18:43 GMT
References: <1991Feb14.233331.28653@ccu.umanitoba.ca>
Reply-To: jeff@dwerger.UUCP (Jeffrey E. Finucane)
Organization: Custom Tailored Systems, Inc.
Lines: 18

In article <1991Feb14.233331.28653@ccu.umanitoba.ca> umcarls9@ccu.umanitoba.ca (Charles Carlson) writes:
> 
>I'm having a problem with a WD8003e board.  The ram base address seems
>to be conflicting with something else.   How do you change the ram base
>address in this board?  The manual says through the network software,
>I've tried that, and the conflict still exists.  If I run the 
>diagnose software, it says the board is at D0000.  I have an ElitePlus/16
>board which is also at D0000 and works fine in the same machine.  

  If this board is the WD8003ebt it is software configured, indeed.  I
had a similar problem installing this board under SCO ODT with a Paradise
VGA board.  By editing the config files by hand (rather than using the
< mkdev > script) I was able to install this board in the 15th Meg.

-- 

Jeffrey E. Finucane     Custom Tailored Systems    nshore!dwerger!jeff
Data Phone: (216) 935-2712  Telebit Trailblazer  Voice: (216) 935-0252