Xref: utzoo comp.unix.sysv386:5064 comp.dcom.modems:8328
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!magnus.ircc.ohio-state.edu!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!midway!gargoyle!ddsw1!karl
From: karl@ddsw1.MCS.COM (Karl Denninger)
Newsgroups: comp.unix.sysv386,comp.dcom.modems
Subject: Re: Equinox hardware flow control
Summary: It is suported..j
Keywords: Equinox hardware flow control
Message-ID: <1991Feb18.003410.11645@ddsw1.MCS.COM>
Date: 18 Feb 91 00:34:10 GMT
References: <111@astph.UUCP> <1991Feb14.134714.5407@nstar.rn.com>
Organization: Macro Computer Solutions, Inc., Wheeling, IL
Lines: 25

In article <1991Feb14.134714.5407@nstar.rn.com> larry@nstar.rn.com (Larry Snyder) writes:
>bill@astph.UUCP (Bill Dripps) writes:
>
>>We are evaluating Equinox's 24 port Megaport. It looks like a good
>>board. Unfortunately the key tech support person is on vacation this
>>week. Sigh. 
>
>>Anybody know how to turn on hardware flow control using ISC UNIX? The
>>manual tells how for Xenix, but no hints for ISC. Did I miss it?
>
>Hardware flow control for ISC Unix is not supported (so I've been
>told) with the Equinox or stock ISC ASY driver.

Nonsense.

megamap +fmc </dev/ttyxx 

And it's on.  Full-time.  Until you reboot.

This only works on Megaport boards, not the stock ISC driver :-)

- 
Karl Denninger (karl@ddsw1.MCS.COM, <well-connected>!ddsw1!karl)
Public Access Data Line: [+1 708 808-7300], Voice: [+1 708 808-7200]
Macro Computer Solutions, Inc.   "Quality Solutions at a Fair Price"