Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!comp.vuw.ac.nz!actrix!kennels!sbeagle From: sbeagle@kennels.actrix.gen.nz (Sleeping Beagle) Newsgroups: comp.sys.amiga.datacomm Subject: Re: 19200 baud amiga Message-ID: Date: 14 Feb 91 12:24:44 GMT References: <30257@usc> Organization: Orb Systems Unlimited, NZ Lines: 24 papa@pollux.usc.edu (Marco Papa) writes: > Make sure that you're using RTS/CTS handshake at those speeds (make sure that > the sparc serial port is set up that way, too). > > |This is with half duplex enabled (if that does anything in this mode!) > This doesn't doe ANYTHING at all. > |and XON/XOFF handshaking enabled. > This one also has no efect on Zmosdem since Zmodem throws away Xon/Xoffs. > Zmodem is built to work best with RTS/CTS enabled. I admit that I wasn't sure! ;-) However this doesn't mean that i wasn't getting 1800-1900 cps just with dsz (on the PC) speaking to an Amiga 500 running JRComm. And this was with only wires 2,3 and 7 connected. Things do get bad when you try and go faster though! -- ** Official Signature for Sleeping Beagle (aka Thomas Farmer)! ** sbeagle@kennels.actrix.gen.nz || Disclaimers are for sick societies ** Thomas.Farmer@bbs.actrix.gen.nz || with too many lawyers.