Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!pacbell.com!ucsd!network.ucsd.edu!dcdwest!dcdwest.dcdwest.com!steve
From: steve@dcdwest.dcdwest.com (Steve Meloche)
Newsgroups: comp.sys.amiga.hardware
Subject: I/O Expansion Board Kit Query
Message-ID: <1991Feb19.084206.20207@dcdwest.uucp>
Date: 19 Feb 91 08:42:06 GMT
Sender: steve@dcdwest.uucp (Steve Meloche)
Distribution: na
Organization: ITT Aerospace/Communications Division - West
Lines: 13

Does anybody out there know if the I/O expansion board described here and
in AC fit in an A1000 with an Insider memory board?  It looks like it sits
rather low, but I cannot tell from the pictures in the magazine  how much 
it sticks up.  I realize that the memory moard will probably get in the way
of the serial interface boards, but that aside, will the expansion board itself
fit under the (original) insider?


  TIA (thanks in advance), Steven Meloche
    _____ _____ _____
      |   ` | ' ` | '      ITT Aerospace/Communications Division
      |     |     |        San Diego, CA
    __|__   |     |        steve!dcdwest!network.ucsd.edu!ucsd!...