Path: utzoo!censor!comspec!lethe!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!clyde.concordia.ca!nstn.ns.ca!news.cs.indiana.edu!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!jkt100 From: JKT100@psuvm.psu.edu (JKT) Newsgroups: comp.sys.amiga.hardware Subject: Re: Sharp JX300 (RAM and A-Max) Message-ID: <91045.205435JKT100@psuvm.psu.edu> Date: 15 Feb 91 01:54:35 GMT References: <1991Feb14.070253.15390@vicstoy.UUCP> Organization: Penn State University Lines: 32 (Rich Andrews) says: >What would be a reasonable ammount of RAM to have to fully utilize the >scanner? (6M, 10M, more) 5 would be the absolute minimum suggested. Some images can be 4 megs or more, so just get as much as you can afford, or think you will need. ie. If you will only be scanning 2"x3" images, 5 should suffice. If you plan to scan the largest images the JX-100 will do, get more. >Can I scan in images on my Amiga and then transfer then to A-MaxII? Yes. I would manipulate them on the Amiga first, and translate them to PICT for A-Max format as the last step. Amiga has better image manipulation utilities. See below: >I would imagine that a good product to purchase along with the scanner >is TADPro, comments? TADPro would be almost required equipment with the JX-100 I'd think. :-) >-Rich Kurt -- ----------------------------------------------------------------------- || Kurt Tappe (215) 363-9485 || With. Without. And who'll || || 184 W. Valley Hill Rd. || deny it's what the fighting's || || Malvern, PA 19355-2214 || all about? - Pink Floyd || || jkt100@psuvm.psu.edu --------------------------------------|| || jkt100@psuvm.bitnet jkt100%psuvm.bitnet@psuvax1 QLink: KurtTappe || -----------------------------------------------------------------------