Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!crdgw1!uunet!vtserf!vtcc1.cc.vt.edu!flutter
From: flutter@vtcc1.cc.vt.edu (Lloyd Eldred)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: PAL grounding mod for A1000, multi-serial board
Message-ID: <1301@vtserf.cc.vt.edu>
Date: 20 Feb 91 04:05:37 GMT
References: <ben.4958@epmooch.UUCP> <91050.142519DXB132@psuvm.psu.edu>
Sender: news@vtserf.cc.vt.edu
Reply-To: flutter@vtcc1.cc.vt.edu
Distribution: na
Organization: Virginia Tech - Blacksburg, VA
Lines: 14
News-Software: VAX/VMS VNEWS 1.3-4

In article <91050.142519DXB132@psuvm.psu.edu>, DXB132@psuvm.psu.edu writes...
>[I don't have the PAL grounding docs handy; hopefully someone out there
>does!]

   I ordered my A1000 serial kit today, so I've been following any discussion
about this mod with great interest. The PAL grounding mod was written up
in Amazing Computing Vol 3, #3 (1988). I've heard that they later changed
the details on which pins to ground. I had another Amiga owner fix the
diagram in my magazine with what he remembered, but I haven't attempted
the mod, so I don't know if he got it right.
   Hopefully, this will point someone in the right direction to get the full
info. If not, I'll post what I have and hope things work.

%% Lloyd Eldred -- Va Tech Amiga Users Group (ARUS) President