Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uwm.edu!ogicse!pdxgate!eecs.cs.pdx.edu!bartonr
From: bartonr@eecs.cs.pdx.edu (RTFM)
Newsgroups: comp.sys.amiga.programmer
Subject: Re: The Copper / HW level programming.
Message-ID: <1706@pdxgate.UUCP>
Date: 21 Feb 91 00:24:41 GMT
Sender: news@pdxgate.UUCP
Reply-To: bartonr@eecs.cs.pdx.edu (RTFM)
Lines: 8

In article <1991Feb11.162007.7750@vax1.tcd.ie>, smcgerty@vax1.tcd.ie writes:
> The interrupt looks at GfxBase->LOFList (offset 50 from GfxBase) and puts what
> is held there into COP1LC during the vertical blanking interval.

  The copper list chosen (LoFList or ShFList) also depends on whether you are
using interlace and whether the long frame bit of custom.VPOSR is set.

================================================================================