Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!usc!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!uw-beaver!zephyr.ens.tek.com!tektronix!sequent!mntgfx!sboyle
From: sboyle@mentorg.com (Sean Boyle x1542)
Newsgroups: comp.sys.apollo
Subject: Re: uucico via Ethernet on Apollo DN3000 w/SR10.1
Keywords: apollo DN3000 uucico uucp SR10.1
Message-ID: <1991Feb20.000815.1808@mentorg.com>
Date: 20 Feb 91 00:08:15 GMT
References: <48@mgcind.UUCP>
Organization: none
Lines: 20

In article <48@mgcind.UUCP> joe@mgcind.UUCP (Joe Hance) writes:
>I am trying to configure my DN3000 running SR10.1 and having
>the standard Ethernet board installed to run uucico over the
>Ethernet link.  The documentation (as well as the comments
>in some of the files in /usr/lib/uucp) imply that this can
>be done but don't explain exactly how to do it.
>
>Please reply either here or via mail to me at:
Here is the entry for your inetd.conf:

# uucp daemon for network uucp connections
uucp            stream  tcp     nowait  root    /usr/lib/uucp/uucpd     uucpd

The Systems file looks something like this if you don't poll them...:
<sitename> Never - - - -
-- 
"There is a time to laugh and a time not to laugh and this is not one of them."
                                              Inspector Jacques Clouseau

sboyle@mentor.com				Mentor Graphics Corporation