Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!wuarchive!psuvax1!psuvm!art100
From: ART100@psuvm.psu.edu (Andy Tefft)
Newsgroups: comp.sys.apple2
Subject: Re: Printing HGR screens from BASIC...
Message-ID: <91049.103031ART100@psuvm.psu.edu>
Date: 18 Feb 91 15:30:31 GMT
References: <60293@eerie.acsu.Buffalo.EDU> <kbjv90u00WB_4AgWRz@andrew.cmu.edu>
Organization: Penn State University
Lines: 11

don't forget, the bits on the screen are aligned horizontally,
while the printer prints vertical bytes, so there's a good
bit of screwing around there. as for the "nonlinearly wrapped"
stuff, that's fairly easy to take care of with the bascalc
routine.

And then you have to worry about aspect ratios.

Now, if you have a printer interface like the venerable grappler
you can just send a control-I G to the printer (actually the interface)
and let IT worry about it for you :-)