Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!bruce!monu1!monu0!monu6!rdt154k
From: rdt154k@monu6.cc.monash.edu.au (mr  n    benci)
Newsgroups: comp.sys.atari.st.tech
Subject: Atari DMA to SCSI.
Keywords: Why no reasonable reply.
Message-ID: <1991Feb14.215742.21909@monu6.cc.monash.edu.au>
Date: 14 Feb 91 21:57:42 GMT
Organization: Caulfield Campus, Monash University, Melb., Australia.
Lines: 25

I have posted twice in regards to how do you convert the DMA port to
SCSI configuration. So far no one has given even a hint as to how to do it.
All that I have been told is to go and by either an ICD or BMS200 host 
adapter. I'm sorry to say that I am a technical junkie. I would really like
to know. It seems ridiculous that I can find out how an ST506 is connected
and operating on a PC, a SCSI drive is connected and operating on a SUN,
on an AMIGA and on a MAC. BUT no where can I get info for the ST. Is this a 
deep dark secret, is it labeled as 'EYES ONLY', WHAT GIVES ??

If this info is non-disclosure material then say so and I'll quit asking,
but if it isn't then why wont anyone offer me some advice. Yes there are
still a few who are willing to build there own hardware addons.

Thanks in advance.

------------------------------------------------------------------------------
* Nino Benci. 			      * Confucious say			     *
* Monash University, Caulfield Campus * 'Never stand alone against           *
* Physics Department		      * ignorance'		             *
* 900 Dandenong Rd, Caulfield East    ****************************************
* VIC, 3145. Australia.							     *
* Tel (61) (3) 573 2355/2519. Fax (61) (3) 573 2350			     *
* email oz: rdt154k@monu6.cc.monash.oz.au				     *
* email world: rdt154k%monu6.cc.monash.edu.au@uunet.uu.net		     *
------------------------------------------------------------------------------