Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!van-bc!rsoft!mindlink!a1076
From: Robert_Bell@mindlink.UUCP (Robert Bell)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: adapter card
Message-ID: <4822@mindlink.UUCP>
Date: 16 Feb 91 04:27:18 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 12

Can anyone tell me anything about a card i have ,it's marked IOMEGA combo
adapter board and has two connectors marked analog and scsi,the chips on the
board are marked OMTI-I assume this is a scsi host board.
Basically I need to know how the jumpers should be set and what are the dip
switch settings .Also could this board be used to drive a tape backup system
and if so do I need any special drivers.Also what is the analog connector for?
--
-------------------------------------------------------------------
Robert Bell                       uunet!van_bc!rsoft!mindlink!a1076
Benndorf-Verster                  a1076@mindlink.uucp
Vancouver Canada                  voice 604-853-5870
-------------------------------------------------------------------