Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!media-lab!mjkobb
From: mjkobb@media-lab.MEDIA.MIT.EDU (Michael J Kobb)
Newsgroups: comp.sys.mac.hardware
Subject: Re: radius pivot
Summary: Control panel problems
Message-ID: <5267@media-lab.MEDIA.MIT.EDU>
Date: 18 Feb 91 05:36:10 GMT
References: <1991Feb12.202243.8972@fcom.cc.utah.edu> <1406@radius.com>
Reply-To: mjkobb@media-lab.media.mit.edu (Michael J Kobb)
Organization: MIT Media Lab, Cambridge MA
Lines: 18

Greetings!

  I have a Pivot, which I've been very pleased with.  One thing, though.  In
the monitors CDEV, if I set the position of the Radius with respect to my
Apple RGB, then rotate the Pivot, and change the position in the other
orientation, only one of those settings "sticks".  It seems that the software
automatically adjusts the other position to make up for the difference in
geometry of the Pivot in its two positions.  The problem, though, is that I
use the Pivot for different purposes in its two positions, and I would like
very much for the allignment to be different in the two positions.  Is there
any way to override this automatic correction?

  Second, any word on a possible 8-bit Pivot?  Please?

  BTW, I'd be interested in 1.7, if it's released...

Thanks,
--Mike