Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!ogicse!cs.uoregon.edu!mings
From: mings@cs.uoregon.edu (Ming Yau So)
Newsgroups: comp.sys.mac.misc
Subject: Re: snd1->snd2?
Keywords: sound, snd, soundmover
Message-ID: <1991Feb16.113503.3637@cs.uoregon.edu>
Date: 16 Feb 91 11:35:03 GMT
References: <5891@mentor.cc.purdue.edu> <1991Feb15.100738.6561@cs.uoregon.edu> <5973@mentor.cc.purdue.edu>
Sender: mings@cs.uoregon.edu (Ming Yau So)
Followup-To: comp.sys.mac.misc
Organization: Department of Computer Science, University of Oregon
Lines: 25

In article <5973@mentor.cc.purdue.edu> miyakekm@mentor.cc.purdue.edu (Keith Miyake) writes:

   [ question about snd1->snd2 and my answer ]

>
>I tried SoundMover, but last I checked, it was only able to
>write type 1 'snd ' resources.  Is it *really* able to
>do what I want?
>
>-Sho

Yup, first you create an empty stack (or if you want to add snd2 to a stack,
use a copy of it).  Then launch SoundMover, open the file which contains
the snd1 resource, open the stack on the other side, copy the sound from
the original file into the stack, and you are done.  If you want to make
sure the copy is really a snd2 resource, highlight it, hear it plays, and
look at the description in the middle of the window, it should say that
it's a snd2 sound.


--
___________________________________________________________________________
   Ming Yau So                        | Disclaimer needs to be repaired !!
   Internet: mings@cs.uoregon.edu     |      >>>SCUD>>>   (disclaimer) 
   AOL: Ming So                       |------------------------------------