Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!decwrl!parc!mdixon From: mdixon@parc.xerox.com (Mike Dixon) Newsgroups: comp.sys.next Subject: Re: Fujitsu installation problems... Message-ID: Date: 17 Feb 91 01:24:17 GMT References: <26929@uflorida.cis.ufl.EDU> Sender: news@parc.xerox.com Organization: Xerox PARC Lines: 13 The drive sits on top of the OD with the power cable on the right. When I plug the 25 pin flat cable (that comes out of the cpu to the OD then to the HD) in and boot the cube says loading from OD then immediatley tries to load off the network (which doent exist). whoa, you're in trouble boy. the OD plugs into a completely different connector on the processor board than the scsi devices; if you've got one cable connected to both the OD and a scsi disk you're seriously confused. hope you haven't fried anything... -- .mike.