Path: utzoo!censor!comspec!lethe!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!lll-winken!elroy.jpl.nasa.gov!usc!samsung!munnari.oz.au!metro!utsmips!kgispy.ccsd.uts.EDU.AU!patrick From: patrick@kgispy.ccsd.uts.EDU.AU (Patrick Herlihy) Newsgroups: comp.sys.sgi Subject: RARP Server for SGI Message-ID: Date: 15 Feb 91 01:22:25 GMT Sender: news@utsmips.csd.uts.EDU.AU Lines: 19 Nntp-Posting-Host: kgispy.ccsd.uts.edu.au We have wanted to setup our SGI as a RARP server for a group of PCs running NCSA Telnet, but were not supplied with the rarpd server. SGI here have told us that we should have received it in the eoe-3.3.1 release tape, but it isn't there. Does anyone have a rarpd suitable? Following is "hinv" output: 1 20 MHZ IP6 Processor FPU: MIPS R2010A/R3010 VLSI Floating Point Chip Revision: 2.0 CPU: MIPS R2000A/R3000 Processor Chip Revision: 2.0 Data cache size: 32 Kbytes Instruction cache size: 64 Kbytes Main memory size: 12 Mbytes Integral Ethernet controller: Version 0 Integral SCSI controller 0: Version WD33C93A Tape drive: unit 2 on SCSI controller 0: QIC 150 Disk drive: unit 1 on SCSI controller 0 Any help appreciated!