Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!fub!opal!tub!gmdtub!bigfoot!tmh
From: tmh@bigfoot.FOKUS.GMD.DBP.DE (Thomas Hoberg)
Newsgroups: comp.unix.sysv386
Subject: Re: VP/ix over serial/modem lines
Keywords: VP/ix, serial, modem, possible
Message-ID: <317@bigfoot.first.gmd.de>
Date: 16 Feb 91 17:26:47 GMT
References: <170@rubys.UUCP>
Sender: news@bigfoot.first.gmd.de
Reply-To: tmh@bigfoot.FOKUS.GMD.DBP.DE (Thomas Hoberg)
Organization: Gesellschaft fuer Mathematik und Datenverarbeitung (GMD)
Lines: 28


In article <170@rubys.UUCP>, dnb@rubys.UUCP (Dave Buonomo) writes:
|> I'm running VP/ix on top of Interactive UNIX Sys V 3.2.2.  I would like to
|> dial-in to this box from a PC and run VP/ix remotely and would like to know
|> of any experiences with this, or wheather it is even practical.  In
|> particular, what type of terminal emulation is necessary from a dial-in PC?
|> Will I need a terminal emulation package to emulate a "PC/AT" type terminal?
|> Other than graphics applications (I think it's safe to rule out these over
|> dial-in lines), is there a TERM type that I need to set to fully support
|> "character" graphics, full-screen cursor addressing, etc.?
|> 
|> I'd also like to know of any other configuration items I need to be
concerned
|> with on the UNIX box in relation to VP/ix.  Thanks in advance.
|> 
|> David Buonomo
|> ...!uunet!fltk!ruby!dnb
|> (301)916-0807
I'd really be interested in a small PD scan-code terminal emulatore myself,
preferably in source so I can adapt it. I'd also just love to have scan-code
terminal emulation built into telnet. Asking too much?
----
Thomas M. Hoberg   | UUCP: tmh@bigfoot.first.gmd.de  or  tmh%gmdtub@tub.UUCP
c/o GMD Berlin     |       ...!unido!tub!gmdtub!tmh (Europe) or
D-1000 Berlin 12   |       ...!unido!tub!tmh
Hardenbergplatz 2  |       ...!pyramid!tub!tmh (World)
Germany            | BITNET: tmh%DB0TUI6.BITNET@DB0TUI11 or
+49-30-254 99 160  |         tmh@tub.BITNET