Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!midway!gargoyle!chinet!randy
From: randy@chinet.chi.il.us (Randy Suess)
Newsgroups: comp.unix.sysv386
Subject: Re: Adding second HD under ISC 2.0.2
Message-ID: <1991Feb18.151151.15703@chinet.chi.il.us>
Date: 18 Feb 91 15:11:51 GMT
References: <1991Feb12.065726.5497@foster.avid.oz.au> <3440010@hparc0.HP.COM> <1991Feb17.164248.7856@n8emr.uucp>
Organization: Chinet - Chicago Public Access UNIX
Lines: 17

In article <1991Feb17.164248.7856@n8emr.uucp> gws@n8emr.uucp (Gary Sanders) writes:
>	MY primary controllers is a WD1007 with a couple of 
>160mb drives and two floppys hanging off of it. I would like  to
>add a second controller, (mfm or rll) Will this work? Any specific
>requirments needed by the controller for this to work.
>

	Yes, no problem whatsoever.  The ISC docs cover it completely.
	You just need another controller with configurable i/o port
	and interrupt jumpers.  And no floppy controller.  I have
	an Adaptec ESDI controller with 2 158 meg drives and a
	WD RLL controller with 2 110 meg drives. 
	Works like a champ.

-- 
Randy Suess
randy@chinet.chi.il.us