Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!VAX1.CC.UAKRON.EDU!mcs.kent.edu!usenet.ins.cwru.edu!ukma!rex!rouge!basin04.cacs.usl.edu
From: pcb@basin04.cacs.usl.edu (Peter C. Bahrs)
Newsgroups: comp.windows.ms
Subject: Re: WinQVT/NET; it's great!
Message-ID: <24300@rouge.usl.edu>
Date: 1 Feb 91 17:00:34 GMT
References: <23509@rouge.usl.edu> <1991Jan31.215723.18412@bronze.ucs.indiana.edu> <57356@eerie.acsu.Buffalo.EDU>
Sender: anon@rouge.usl.edu
Organization: The Center for Advanced Computer Studies
Lines: 30

In article <57356@eerie.acsu.Buffalo.EDU> gerland@ubvmsb.cc.buffalo.edu writes:
>I can't get WinQVT/NET to work.  Here is my situation/problems:
>
>I'm running Win 3.0 on a PS/2 Model 50 Z
>I have the NCSA Telnet package Version 2.2TN
>   which includes the 3c523 packet driver Version 7.1.2
>                  Class 1 Type 13 Version 7 Extended 2
>   which I start with the followin gline in my AUTOEXEC.BAT file:
>   C:\NCSATN\3C523 -w 0X60 03 0X300 0XC000
>
>.....
>host=ns.buffalo.edu
>host_ip=128.205.1.2
>nameserver=1
>gateway=1

I had the same problem.  I had to understand the nameserver and gateway
settings.  I think I do now; it works now...

I had a default stanza; this was #1.  I then added a new stanza
for host_ip=130.70.40.4, host=gator.cacs.usl.edu blah, blah.
This is #2.  This is my gateway and nameserver.  So all of my other stanza's
have gateway=nameserver=2.

Hope this helps and its correct.
.
.

P
must