Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!ucsd!ucbvax!ulkyvx.BITNET!MEHARP01 From: MEHARP01@ulkyvx.BITNET (Michael Harpe) Newsgroups: sci.electronics Subject: Prototype quantity PCB manufacturing Message-ID: Date: 15 Feb 91 18:52:00 GMT Sender: daemon@ucbvax.BERKELEY.EDU Lines: 22 Where does one go when he needs a "small" quantity of PC boards made up? I'm talking about small, double-sided boards, not multi-layer 12" X 12" NeXT machine boards :-). I know there must be a place than can do this. I am working on a project that will need a PC board (uses DRAMs and other high speed circuitry) so i'd like to know what this will cost and whether it's feasible at all. I'm a rookie at this, so forgive me if this is a stupid/common/"You oughta know that by now" kind of question. I noticed a couple of places in Circuit Cellar Ink but I didn't get the impression that they make small quantities. Please respond directly to me. If I get responses with wide appeal, i'll summarize to the net. BTW, thanks to all for the sync generator tips, I have what I need now! --------------------------------------------------------------------- Michael Harpe, N4PLE | BITNET: MEHARP01@ULKYVX North Computer Center | VOICE: 502-588-6882 University of Louisville | FAX: 502-588-5055 Louisville, KY 40292 | AURAL: "Mike!" ---------------------------------------------------------------------