Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uunet!infonode!ingr!b11!goodloe From: goodloe@b11.ingr.com (Tony Goodloe) Newsgroups: sci.electronics Subject: Re: Novice SPICE query (op-amp info) Message-ID: <1991Feb19.162949.11005@b11.ingr.com> Date: 19 Feb 91 16:29:49 GMT References: <881@keele.keele.ac.uk> Organization: Intergraph Corp. Huntsville, AL Lines: 65 in article <881@keele.keele.ac.uk>, csx18@seq1.keele.ac.uk (C.M. Yearsley) says: > > I've just started using SPICE and would greatly appreciate any > standard subcircuits people could point me to. Specifically I > need to simulate a TL072 op-amp, among other things. I'm using > version 2G5 if that makes any difference. > > -- > ---------------------------------------------------------------------------- > Chris Yearsley JANET: csx18@uk.ac.keele.seq1 > USENET: csx18@seq1.keele.ac.uk Here is a model from TI. They have a DOS disk full of them, along with a data book. Get in touch with them at: Texas Instruments Inc. Literature Response Center P.O. Box 809066 Dallas 75380-9066 The name of the box and disk is "Linear Circuits - Operational Amplifier Macromodels" * TL072 operational amplifier "macromodel" subcircuit * created using Parts release 4.01 on 06/16/89 at 13:08 * (REV N/A) * connections: non-inverting input * | inverting input * | | positive power supply * | | | negative power supply * | | | | output * | | | | | .subckt TL072 1 2 3 4 5 * c1 11 12 3.498E-12 c2 6 7 15.00E-12 dc 5 53 dx de 54 5 dx dlp 90 91 dx dln 92 90 dx dp 4 3 dx egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 fb 7 99 poly(5) vb vc ve vlp vln 0 4.715E6 -5E6 5E6 5E6 -5E6 ga 6 0 11 12 282.8E-6 gcm 0 6 10 99 8.942E-9 iss 3 10 dc 195.0E-6 hlim 90 0 vlim 1K j1 11 2 10 jx j2 12 1 10 jx r2 6 9 100.0E3 rd1 4 11 3.536E3 rd2 4 12 3.536E3 ro1 8 5 150 ro2 7 99 150 rp 3 4 2.143E3 rss 10 99 1.026E6 vb 9 0 dc 0 vc 3 53 dc 2.200 ve 54 4 dc 2.200 vlim 7 8 dc 0 vlp 91 0 dc 25 vln 0 92 dc 25 .model dx D(Is=800.0E-18) .model jx PJF(Is=15.00E-12 Beta=270.1E-6 Vto=-1) .ends