Xref: utzoo comp.unix.sysv386:5370 comp.dcom.modems:8437 Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!usc!apple!netcom!dlb!zygot!john From: john@zygot.ati.com (John Higdon) Newsgroups: comp.unix.sysv386,comp.dcom.modems Subject: Re: Equinox hardware flow control Message-ID: <30054@zygot.ati.com> Date: 23 Feb 91 02:28:05 GMT References: <111@astph.UUCP> <1991Feb14.134714.5407@nstar.rn.com> <30021@zygot.ati.com> Reply-To: john@zygot.ati.com (John Higdon) Organization: Green Hills and Cows Lines: 13 Summary: Expires: Sender: Followup-To: In article todd@Quotron.COM (Todd_Booth) writes: >I assume you have the modem drop the interface speed down to the link >speed. Otherwise, when sending files _from_ ISC to a remote host (with >the link lower than the interface), your modem will drop many characters. Yes, this is the suggestion in the Megaport manual. S51 is set at 254, which causes the interface to follow the connect rate and calls for 19200 baud when connected with PEP. In my particular application, the modems are used virtually 100% at PEP anyway. -- John Higdon | P. O. Box 7648 | +1 408 723 1395 john@zygot.ati.com | San Jose, CA 95150 | M o o !