Path: utzoo!mnetor!tmsoft!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!wuarchive!emory!rsiatl!nanovx!msa3b!kevin
From: kevin@msa3b.UUCP (Kevin P. Kleinfelter)
Newsgroups: comp.dcom.modems
Subject: Re: Problems between T2500 and Hayes V series modems?
Message-ID: <1542@msa3b.UUCP>
Date: 22 Feb 91 12:34:41 GMT
References: <786@dynasys.UUCP>
Organization: Dun and Bradstreet Software, Inc., Atlanta, GA
Lines: 14

jessea@dynasys.UUCP (Jesse W. Asher) writes:

>Has anyone had problems getting a T2500 and a Hayes V series modem
>connected?  I'm having a strange problem - the modems connect but
>connect at 300 or 2400 baud and sometimes the T2500 doesn't get a 
>CONNECT message.  Anyone have any ideas on what could be causing this?

2400 is the best you'll get here.  The only protocols that the Telebit
T2500 and the Hayes 9600 V-series have in common are 300, 1200, and 2400.
-- 
Kevin Kleinfelter @ Dun and Bradstreet Software, Inc (404) 239-2347
{emory,gatech}!nanovx!msa3b!kevin

Look closely at the return address.  It is nanovx and NOT nanovAx.