Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!caen!news.cs.indiana.edu!ethome.et.iupui.edu!sparcplug!jon
From: jon@sparcplug.et.iupui.EDU (Jon Burgoyne)
Newsgroups: comp.dcom.sys.cisco
Subject: Route to specific host
Message-ID: <1991Feb21.162030.22909@ethome.et.iupui.edu>
Date: 21 Feb 91 16:20:30 GMT
Sender: usenet@ethome.et.iupui.edu (USENET News System)
Reply-To: jon@sparcplug.cadcam.iupui.edu
Organization: Purdue University, Indianapolis
Lines: 14


We are running all Cisco routers and have a need at one location to provide
specific routes to a few machines.  

All the machines in this building tie to a concentrator, therefore they all
exist on the same physical class C subnet.  However, we have a few Sun Sparc's
that must be isolated from this loop.  They have a Sparc with 2 ethernet ports
and so therefore can use it as their default router, however, I don't know how
to explain this to our Cisco Box (running 8.1(19)). 

Anyone out there ever have this problem, and find a solution?

											Jon Burgoyne
											jon@sparcplug.cadcam.iupui.edu