Xref: utzoo comp.protocols.tcp-ip.ibmpc:5001 comp.sys.ibm.ps2.hardware:437
Path: utzoo!attcan!uunet!wuarchive!cs.utexas.edu!helios!mtecv2!josevela
From: josevela@mtecv2.mty.itesm.mx (Jose Angel Vela Avila)
Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.sys.ibm.ps2.hardware
Subject: Re: NCSA Telnet on PS/2 Model 55sx & 3Com 3c523 card.
Message-ID: <2879@mtecv2.mty.itesm.mx>
Date: 11 Feb 91 15:08:17 GMT
References: <50@atom2.LHRL.OZ.AU>
Followup-To: comp.protocols.tcp-ip.ibmpc
Organization: ITESM. Campus Monterrey
Lines: 25

ian@atom2.LHRL.OZ.AU (Ian Crakanthorp) writes:

>A friend of mine who works for a different organisation but is on the same
>site is having problems getting NCSA telnet 2.2 to work on his IBM Model 55sx
>PS/2.

>Could somebody mail/reply by news if they have NCSA telnet working with a 3c523
>MICROCHANNEL card.  By this could I have the config.tel, the config.sys/
>autoexec.bat, The hardware setup of the 3c523 card (addresses interupts etc),
>the packet driver used (or not used), please.

>We have tried using the packet driver (Ver 7) and have so far been unable to
>get it to load.  I would appreciate any help.

>Thanks

>Ian Crakanthorp			ian@atom.lhrl.oz.au
>				ian%atom.oz@munnari.cs.mu.oz.au

 Maybe your problem is the packet driver, try version 5 (5.2 ?? )

 Bye.

Jose A. Vela Avila
josevela2mtecv2.mty.itesm.mx


Brought to you by Super Global Mega Corp .com